Medical Adhesives Manufacturer - Your Trusted Factory for Medical Adhesives
Medical Adhesives Manufacturer
We manufacture premium medical adhesives, offering full in‑house capabilities including OEM/ODM, private label, sterile packaging, and custom formulation — all from our controlled clean‑room environment. Whether you need sterilizable, biocompatible skin‑contact adhesives or device‑bonding glues for wearables, medical tapes, or disposable medical products, ZDS delivers consistent quality, regulatory-ready documentation, and scalable production.
Factory Capability Proof
ZDS runs dedicated clean‑room adhesive production lines, with full traceability and compliance to medical‑industry standards — ideal for manufacturing adhesives for skin contact or medical devices.
ISO‑style clean‑room manufacturing
separating skin‑contact adhesive lines (e.g. silicone, hydrogel) from industrial lines, minimizing cross‑contamination.
In‑house laboratory
performing biocompatibility testing (cytotoxicity, skin irritation, sensitization), sterilization compatibility (gamma, EtO), peel and shear adhesion measurement, and accelerated aging tests.
Strict QC workflow
raw‑material verification, batch number tracking, VOC and residual monomer analysis, adhesive consistency and cure‑time control, final batch release only after passing all safety and performance criteria.
Packaging & Sterilization Services
from small sterile syringes or tubes for surgical adhesives to bulk cartridges for medical tapes, with optional EO or gamma sterile packaging and accompanying LOT traceability — ready for OEM/brand‑labeling.
ZDS Medical Adhesives
| Model | Category | Appearance | Viscosity | Curing | More |
|---|---|---|---|---|---|
| ZDS-5013AB | Epoxy | More | |||
| ZDS-2186AB | Acrylic | Amber liquid | 18000-30000 cps | 5-8 min @25°C | More |
| ZDS-PA1600AB | Acrylic | 8 min @25°C | More | ||
| ZDS-703AB | Epoxy | More | |||
| ZDS-5017AB | Acrylic | More | |||
| ZDS-1346AB | Acrylic | 5 min @25°C | More | ||
| ZDS-4018AB | UV | 1200-1800 cps | 10-30 s @365-405nm | More | |
| ZDS-5014AB | Epoxy | 24 h @25°C | More | ||
| ZDS-1101AB | Epoxy | 50000-80000 cps | 30 min @25°C | More | |
| ZDS-2109011 | Acrylic | Colorless to light yellow transparent liquid | 12000-35000 cps | 150-200mj (50W LED light 395nm) | More |
| ZDS-2201061 | UV | Transparent or yellowish liquid | 7 cps | 200 mJ @ 365/395nm LED light | More |
| ZDS-2011031 | UV | Translucent liquid (thixotropic) | 10000-25000 cps | 880mj exposure (2KW medium pressure mercury lamp) | More |
Application Solutions
Material Decision Matrix
| Application / Product Type | Adhesive Type | Key Benefits / Considerations |
| Wound closure, minor surgery | Cyanoacrylate surgical adhesive | Rapid cure, high bond strength, sterilizable, minimal residue |
| Wearable patches / sensor adhesives (skin) | Silicone-based or hydrogel adhesive | Biocompatible, gentle on skin, hypoallergenic, flexible, washable |
| Medical tape / dressing attachment | Medical grade acrylic adhesive | Balanced adhesion and removal, skin-safe, low irritation |
| Device assembly (plastic, metal, fabric) | Medical-grade structural adhesive | Strong bonding, chemical resistance, sterilization stability |
| Disposable / single-use devices | Sterilizable adhesive + sterile packaging | Regulatory traceability, consistent batch quality, scalable packaging |
| OEM / Private label medical supplies | Custom-formulated adhesive per spec | Tailored cure time, adhesion strength, skin/contact compliance, packaging |
Performance Parameter Table
| Parameter (depending on formulation) | Typical Specification / Range |
| Peel Adhesion (skin patch) | 1.5–3.0 N/cm on clean skin |
| Shear/Tensile Strength (device bonding) | 6–12 MPa (after full cure) |
| Cytotoxicity (ISO 10993 5) | Pass — no cytotoxic response |
| Skin Irritation / Sensitization (ISO 10993 10) | Pass — non irritant, hypoallergenic |
| Sterilization Compatibility | Stable after gamma / EtO sterilization |
| Residual Monomer / VOC Content | < 0.1% residual monomer (cyanoacrylate) / minimal VOC (solvent free or hydrogel types) |
| Working Time / Cure Time | 10–60 seconds (surgical glue), 2–5 minutes (device assembly adhesives) |
| Service Temperature / Humidity Range | –20 °C to +60 °C, up to 95% RH (humid tolerant formulations) |
These performance benchmarks align with typical requirements for medical device bonding, skin‑contact reliability, sterilization resistance, and safe wound‑care applications.
Real Industry Use Cases
OEM Production
Wearable Sensor Patches
A manufacturer of continuous‑glucose monitors needed a skin‑friendly adhesive that could hold sensors firmly in place for 5–7 days without causing redness or discomfort. ZDS developed a hydrogel-based adhesive that met biocompatibility standards and maintained adhesion despite sweat, movement, and daily washing.
Grade Bonding Glue
Private‑Label
A regional distributor commissioned ZDS to supply medical‑grade acrylic adhesive in bulk pails under their own brand. ZDS handled formulation tuning, lot‑tracking, and packaging — allowing the distributor to offer a premium‑quality medical tape without investing in their own production facility.
Sampling & Rapid Prototyping
- Free small‑volume samples (e.g., 50–100 g) — for adhesion testing, skin patch trials, cure‑time verification, and sterilization stress tests.
- Custom formulation tweaks — adjust cure rate, adhesive tackiness, softness, residue, or sterilization compatibility.
- Pilot‑scale production batches — once sample testing passes, ZDS can produce pilot batches under clean‑room conditions for final customer validation before full-scale orders.